DX970 - Digital hot wire anemometer probe (directional)

DX 970 are compact and reliable hot-wire anemometers, ideal for measuring air velocities in exhaust systems and ventilation ducts.
The small diameter of Ø 12 mm allows measurement in correspondingly small measuring openings.
The measurement is direction-dependent, the direction is easily recognizable by the sensor construction.
They are designed for use with PRO D01/D05/925/595 handheld measuring devices and can therefore be easily combined with any other sensors, such as the DX 310 air humidity sensors or DX 330 air quality sensors.
The measurement is temperature compensated over a wide range for enhanced accuracy.
The probes are supplied factory-calibrated, and they are ready to use.
They can be optionally supplied with an ISO 9001 factory calibration or EN ISO/IEC 17025 ACCREDIA calibration certificate.
The calibration data are stored in the probe, allowing for interchangeability without the need for recalibration.
Equipped with 5-pin M12 connector “DX-Sensor standard”, connectable to PRO-D0x and PRO 925/595 multifunctional meters.

Equipped with 4-pin M12 connector.

Protection class:

IP40

Output:

DX-Sensor-Interface, interchangeable without loss of accuracy

Connection:

M12A connector, 5-pin

Sensor:

hotfilm anemometer sensor, directional

Compensated temperature:

0…+50 °C

Operating conditions:

0 … +50 °C

Storage temperature:

-20 ... +60 °C

Applications:

Only air and non-aggressive dry gases

Measurement rate:

1 /s