DX 115 - Digital Pt100 immersion probe, large handle (e.g. for PRO D0x)

DX 115 is a high precision digital immersion wire wound Pt100 temperature probes for the PRO D01 / PRO D05 handheld meters.

The probe is supplied factory-calibrated, and it is ready to use. It can be optionally supplied with a DAkkS/ACCREDIA calibration certificate.

The calibration data are stored in the probe, allowing for interchangeability without the need for recalibration.

The user can adjust the probe in two points (offset and slope) or by setting R0 (sensor resistance @ 0 °C) and the Callendar-Van Dusen parameters.
Supplied with 1, 2 or 5 m cable with 4-pin M12 connector.

Output:

UART (TTL 3.3V)

Power supply:

3.3…6 Vdc

Power consumption:

<1 mA typ.

Connection:

4-pole M12

Dimensions:

Stem: Ø3 mm, L=130/230/300 mm (other lengths on request) Handle length 98 mm Cable: Ø4 mm, L=1, 2 or 5 m

Weight:

110 g approx. with 2 m cable

Sensor:

Pt100 (Wire Wound)

Measuring range:

Stem length 230 and 300 mm: -196…+500 °C insertion probe 150 mm: -196…+250 °C

Resolution:

0.01 °C

Accuracy:

±0.05 °C (t = 0 °C) ±0.1 °C (0 °C ≤ t ≤ 100 °C) ±0.2 °C (-50 °C ≤ t < 0 °C, 100 < t ≤ 250 °C) ±0.3 °C (t = remaining range)

Materials:

Stem: AISI 316 Handle: Polyamide (PA6-GF30) Cable: PVC (-20...+105 °C)

Protection degree:

IP67

Applications:

Immersion

Response time:

3 s

Handle Materials:

Polyamide (PA6-GF30), grommet Santoprene (up to +120 °C)

Response time (T63):

3 s