DX11 - Digital Pt100 immersion probe, large handle (e.g. for PRO D0x)

DX 115 is a high precision digital immersion wire wound Pt100 temperature probes for the PRO D01 / PRO D05 handheld meters.

The probe is supplied factory-calibrated, and it is ready to use. It can be optionally supplied with a DAkkS/ACCREDIA calibration certificate.

The calibration data are stored in the probe, allowing for interchangeability without the need for recalibration.

The user can adjust the probe in two points (offset and slope) or by setting R0 (sensor resistance @ 0 °C) and the Callendar-Van Dusen parameters.
Supplied with 1, 2 or 5 m cable with 4-pin M12 connector.

Measuring range:

- 196...+ 500 °C

Resolution:

0.01 °C

Output:

UART (TTL 3.3V)

Power supply:

3.3…6 Vdc

Power consumption:

<1 mA typ.

Dimensions:

Stem: Ø3 mm, L=130/230/300 mm (other lengths on request)
Handle length 98 mm
Cable: Ø4 mm, L=1, 2 or 5 m

Weight:

110 g approx. with 2 m cable

Materials:

Stem: AISI 316
Handle: Polyamide (PA6-GF30)
Cable: PVC (-20...+105 °C)

Protection degree:

IP67

Applications:

Immersion

Response time:

3 s

Connection:

4-pole M12