All Categories

- en

Home
Products
Contact

XPT Line

Category

XPT Line (2)
Sound & Vibration (2)

Acoustic standards

IEC: Sound Level Meter IEC 61672-1 (2013) class 1 IEC 60651 (1979) plus Amendment 1 (1993-02) and Amendment 2 (2000-10), type 1 IEC 60804 (2000-10) type 1 Octave and fractional octave band filters IEC 61260-1 (2014) ANSI Sound Level Meter ANSI S1.4-1983 plus ANSI S1.4A-1985 Amendment type 1 (sound level meter) ANSI/ASA S1.4-2014 class 1 ANSI S1.43-1997 type 1 Octave and fractional octave band filters ANSI/ASA S1.11-2014 Part 1

Analysis software

Environmental Noise Studio

Audio

Recording: Mode: continuous or event. Resolution 16, 24, 32-bit. Audio-band: 5, 10, 20 KHz. Format: Wave or compressed ADPCM Playback: Embedded codec for signal generation. Filtered Audio playback of microphone input

Averaging

Linear, exponential, moving, max, min

Calibration

Acoustic: Manual or automatic (tone detection). Calibrations history

Connections

Microphone: MC800: Free field ½”, 50 mV/Pa sensitivity; 0V; IEC 61094-4 WS2F, 3.15Hz-20KHz. MP800: preamplifier, automatic detection of model and calibration data. SDI (Sensor Digital Interface). CTC automatic electric calibration Accelerometer: IEPE, 4-pin circular push-pull, tri-axial

Detectors

Tonality: Automatic identification according to DM 16/03/1998 and ISO1996-2 (TBA) Impulsivity: Automatic identification according to DM 16/03/1998

Dimensions

304x86x38 mm

Display

4.3” touch, 480x800px, colour TFT, high brightness, sunlight readability

Frequency weightings

A, C + B or Z (user selection). 3 simultaneous

Hardware interface

USB-C: USB-C, OTG 2.0. MS (Mass Storage) and CD (Communication Device) Ethernet: RJ45 10/100 Ethernet Aux: RJ12: auxiliary connector for external devices Audio I/O: 3.5mm 4-pin audio jack: audio I/O and trigger I/O

Intelligibility

STI/STIPA (TBA)

Keyboard

ON/OFF/MENU key with RGB backlight; Function keys (2x); Multi-colour Status Indicator.

Localization

GPS: TBA

Logging interval

Time history, independent Short, Standard, Report steps: Short 10ms. Standard 100/200/500ms/1s. Reports: 10/20/30s,1/2/5/10/20/30/60m

Measurement control

Start, stop, pause, reset, back-erase, continue, event marking, audio Recording. Measure timer from 1s to 23:59:59 hrs

Measuring range

Dynamic range: > 125dB Linear Operating Range: A (1kHz) 20 dB – 140 dBPk C 22 dB – 140 dBPk Z 25 dB – 140 dBPk With standard MC800, 50mV/Pa microphone, MP800 preamplifier

Noise criteria

NC, NR, RNC, RC, (TBA)

Parameters

Lp, Leq, LIeq, SEL, Leqmov (Sliding), Lmin/max, Lpeak, Level differences (i.e. LCeq-LAeq), LU (user) LAFT (TaktMax) , LPER(day, evening, night..), Ln (0.1%-99.9%) *For more details about parameters see specific documentation

Power consumption

Operating time > 24h

Power supply

Rechargeable battery pack, Li-Ion polymer, 9000mAh. PCM circuit for battery protection

Set-Option

Environmental noise KIT: Big carring case, firmware OF1E, OF4, ENS, HD2020 sound level calibrator
Standard carrying case

Spectral analysis

Octave: Real time, 1/1 octave, 8Hz to 16kHz, IEC 61260-1:2014 Real time, 1/3 octave 6.3Hz to 20kHz, IEC 61260-1:2014 FFT: TBA

Statistical analysis

Broad band and Spectral: 7x Ln selectable percentile levels (0.1%-99.9%). Probability/Cumulative distribution

Storage capacity

Embedded 4GB eMMC and up to 64GB μSD; USB memory stick Upload to cloud storage service. Manual or (TBA) automatic

Time constants

Fast, Slow, Impulse, Peak simultaneous

Triggers

Single or multiple triggers (OR/AND) on broad-band, spectra, Ln, Lmov

Version

XPT800, MP800 Preamplifier, MC800 Microphone WS90 windscreen, USB Cable, free cloud storage

Views

SLM: 6 user selectable parameters; Levels difference (selectable); bar graph of 3 broadband levels. Alarms display on exceedances. Numerical Tables: All broad-band parameters, weightings & time const. in parallel: Inst., Average, Max-Min 7 x Ln percentiles broad-band, Ln moving, 7 x Ln of 1/1 or 1/3 octave frequency bands. Spectrum: Inst, Min, Max, Avg, Mov, Ln Exceedances: ongoing exceedances; n° of occurrences (SLM, Markers, audio.) Frequency Spectrum: Histograms: up to 4 selectable. Values @cursor position. Overall A, C, Z, User 1/1 or 1/3 octave; Spectrum ponderation: A, C, or Z; Time constants: Lin, Fast or Slow Type: Inst, Mov, Avg, Max, Min, Rep-Avg, Rep-Max, Rep-Min, Evn-Avg, Evn-Max, Evn-Min Time history: Time profile of up to 4 selectable parameters. Audio and event markers as coloured bars. Statistics: Broad-band: Spectral: 1/n oct. Ln levels (histogram); probability/cumulative distribution (TBA).

Weight

505 g (batteries included)

Wireless

Wi-Fi: Embedded WiFi module (IEEE 802.11 b/g/n) GSM: Embedded 4G-LTE modem module (TBA)

XPT Line

Show all articles in this category

Sound & Vibration (2)

Products

XPT Line
- Sound & Vibration
PRO Line
- Multifunction - Digital connectors
- Temperature
ECO Line
Probes

Help/Support

Contact
Terms and Conditions
Data Security
Imprint
Cookie-Settings

Contact

Senseca Germany GmbH
Tenter Weg 2-8
42897 Remscheid
GERMANY
E-Mail: info(at)senseca.com
Internet: www.senseca.com