All Categories

- en

Home
Products
Contact

Probes

Category

Probes (19)
Light (1)
Temperature (6)
Pressure (2)
Relative humidity (2)
pH (5)
pH/Redox (2)
Moisture (1)

Measuring range

-70 ... +250 °C
-65 ... +550 °C
Immersion, insertion: -40 ... +550 °C, AX 131-S15 surface: -40 … +400 °C AX 131-S8 surface: -40 … +900 °C
From ±2.5 hPa to ±700 kPa differential or 0…200 kPa absolute depending on model
-40 ... +400 °C

Connection

BNC plug
Loose ends with wire end ferrules
4-pole M12
Mini flat pin plug
miniature flat plug

Accuracy

DIN class B
Class 1
Standard
±0.5 %FS @ 25 °C
Class B, Class A, Class AA Class 1/10 DIN B

Sensor

Pt1000 cl. B
Type K
type K, class 1
MEMS pressure sensor
AX 111 - Pt100 (thin film) AX 115 - Pt100 (wire wound)

Variant

Greisinger
SENSECA
Type K, class 1, not potential-free
4-wire
4-wire, mineral insulated

Response time

Water 0.4 m/s <2 s, air 2 m/s approx. 40s
Ø 3 mm: water 0.4 m/s < 2 s, air 2 m/s approx. 40 s Ø 3 mm mineral insulated water 0.4 m/s < 5 s
water 0.4 m/s <2 s, air 2 m/s approx. 40 s
3 s
Temperature/RH: 10 s (T63 with 1 m/s air flow) CO 2 : < 120 s (T90 with 2 m/s air flow)

Probe length

100 mm
130 mm
150 mm
300 mm

Cable and length

1 m silicone cable, -50 ... +230 °C permanent, short-time +250 °C
1 m silicone cable
1 m silicone cable, -50 ... +200 °C
1 m PVC cable, -20 ... +105 °C
2 m PVC cable, -20 ... +105 °C

Cable

1 m silicone cable
1 m silicone coated thermocouple cable (up to +200 °C)

Dimensions

Stem: Ø 3 mm, L = 130 mm (other lengths on request) Stem surface: Ø 8 mm or Ø 15 mm, L = 100 mm Cable: Ø 4 mm, L = 1 m
⌀ 21.7 x 62 mm
Stem: Ø3 mm, L=150/300 mm (other lengths on request) Cable: Ø4 mm, L=1, 2 or 5 m
⌀ 59 x 45 mm
Stem: Ø3 mm, L=130/230/300 mm (other lengths on request) Handle length 98 mm Cable: Ø4 mm, L=1, 2 or 5 m

Output

UART (TTL 3.3V)
Type K
Pt100 4-wire

Weight

110 g approx. with 1 m cable
110 g approx. with 2 m cable
74 g approx.
200 g approx.
100 g approx. with 2 m cable

Applications

Immersion, insertion, surface
Only air and non-aggressive dry gases
Immersion, insertion
Immersion

Protection degree

IP67
IP65

Materials

Stem: AISI 316 Handle: Polyamide (PA6-GF30), grommet Santoprene (up to +120 °C)
Stem: AISI 316 Handle: Polyamide (PA6-GF30) Cable: PVC (permanently up to +80 °C / short-term approx. 2 hours per application up to +105 °C)
Stem: AISI 316 Handle: Polyamide (PA6-GF30) Cable: PVC (-20...+105 °C)
PBT
Stem: PBT Handle: Polyamide (PA6-GF30)

Power supply

3.3…6 Vdc
3.3 ... 6 Vdc

Connection (to meter)

mini flat connection
4-pole M12

Connection (to process)

probe Ø 3 mm made of V4A tube
For ⌀ 6x1 mm (internal ⌀ 4 mm) and ⌀ 8x1 mm (internal ⌀ 6 mm) hoses. 2 inputs for differential probes, 1 input for absolute probes

Diameter probe tube

Ø3 mm
Ø1.5 mm

Model

Immersion sensor, blunt
Penetration tip
flat probe tip

Calibration

Factory adjustment with test protocol

Version

Interchangeable without loss of accuracy

Material

Stainless steel
Anodized aluminium

Power consumption

<1 mA typ.
< 1 mA typ.

Operating conditions

-25…+85 °C / 0…95% RH non-condensing
-40…+80 °C / 0…100 %RH
-50…+160 °C / 0…100 %RH

Probe tube

Ø6 mm, length 100 mm, head straight
Ø6 mm, length 120 mm, head angled
Ø6 mm, length 127+60 mm, sensor tube angled
Ø8 mm, lengh 130 mm, ceramic head straight

Resolution

0.01 °C
RH: 0.01 % Temperature: 0.01 °C
0.01 °C (t ≤ +350 °C) / 0.1 °C (t > +350 °C
0.1 °C
Temperature: 0.1 °C RH: 0.1 % Pressure: 0.1 hPa CO 2 : 1 ppm VOC: 1

Working temperature

-25 ... +85 °C
-20…+60 °C / 0…95 %RH non-condensing (*) (*)The sensor shows best performance when operated in 20…80 %RH humidity range. Long term exposure outside the indicated range (especially at high humidity) may temporarily offset the sensor response.

Burst pressure

6 x FS

Cable connection

M12A connector, 4-pin

Compensated temperature

0…+50 °C

Compensated temperature range

0 ... +50 °C

Housing

Stainless steel

Long-term stability

< 1 %FS / year

Option

1 m PVC connection cable M12

Overall error

±2.5 %FS over the whole compensated temperature range

Overpressure

3 x FS

Pressure connection

2x connection for tube 6x1 mm (4 mm inner) or 8x1 mm (6 mm inner), differential
1x connection for tube 6x1 mm (4 mm inner) or 8x1 mm (6 mm inner), absolute

Protection type

IP65

Storage temperature

-40…+125 °C

Warm-up time

2.3 ms

1 year drift

< 1 %
Illuminance: < 1 % UVA irradiance: < 2 %

Calibration uncertainty

< 5 %
< 4 %

Class

B

Measuring range (W/m 2 )

1x10 -3 … 999.9x10 -3 1.000...19.999 20.00...199.99 200.0...1999.9 W/m 2

Measuring range (lux)

0.10…199.99 lux ...1999.99 lux ...19999 lux ...199.99 x 10 3 lux lux

Measuring range (µmol/m 2 s)

0.10…199.99 μmol/m 2 /s 200...1999.9 μmol/m 2 /s 2000...10000 μmol/m 2 /s μmol/m 2 /s

Operating temperature

0…+50 °C

Reference standard

CIE n°69 - UNI 11142

Resolution (W/m 2 )

0.1x10 -3 0.001 0.01 0.1 W/m 2

Probes

Show all articles in this category

Light (1)
Temperature (6)
Pressure (2)
Relative humidity (2)
pH (5)
pH/Redox (2)
Moisture (1)

Products

XPT Line
- Sound & Vibration
PRO Line
- Multifunction - Digital connectors
- Temperature
ECO Line
Probes

Help/Support

Contact
Terms and Conditions
Data Security
Imprint
Cookie-Settings

Contact

Senseca Germany GmbH
Tenter Weg 2-8
42897 Remscheid
GERMANY
E-Mail: info(at)senseca.com
Internet: www.senseca.com